Screen Repair in Carrollwood

Age. A large share of enclosures in Original Carrollwood and Carrollwood Village date from the 1960s through the 1980s, which is well past the service life of the original fasteners and anchors. The most common findings are screws that no longer bite and white corrosion spreading from fastener points, both of which stop a panel holding tension.

Often yes, if the structural aluminum is sound and only hardware needs attention. Frames outlast mesh by decades when they are not corroded through. What is not worth doing is rescreening over failed fasteners or pulled anchors, because the new mesh will go slack within a season. We assess and itemise both parts separately.

It varies widely. Fastener and hardware work runs $110 to $280. Straightening a member is $140 to $420. Replacing an upright or beam is $260 to $700 each. Many Carrollwood jobs need only the first category, which is a modest addition. We give you the split in writing before you decide.

Almost certainly a frame or fastener issue rather than a mesh issue, and it is a common Carrollwood pattern. Repeated failure in one opening means that panel cannot hold tension — usually a loose fastener, a corroded channel, or a corner joint that has opened. Replacing the mesh again without fixing it produces the same result.

Yes, even though we do not build them. If most uprights are corroded through or the footer has failed, repairs only postpone a rebuild and we will say so plainly. We can point you toward Tampa aluminum contractors who build new enclosures well, and we will be here to rescreen it in seven years.

The same as everywhere else in our service area: single panels $35 to $65, single-story pool cage rescreens $1,100 to $2,000, and two-story cages $1,900 to $3,400. Price follows panel count, panel size, enclosure height, mesh grade and frame condition rather than your ZIP code. There is no trip charge to Carrollwood.

No. Carrollwood (33618, 33624) is on our normal route, so the quoted price is what you pay. If you are just outside our service area we will tell you honestly whether the drive works for your job size before quoting rather than padding the number.

Estimates usually within 24 to 48 hours. Lanais and single panels are typically same-week and often sooner. Full pool cage rescreens run one to two weeks out under normal conditions. After a named storm everything stretches, so calling early puts you in the queue at the right position.

Two years on workmanship and spline installation, identical across all sixteen communities we serve. That covers mesh pulling loose from a channel, panels going slack and spline backing out. New damage from a storm, a falling branch or a pet is not a workmanship issue, but we will repair it at our normal per-panel rate.

All seven: pool cage rescreening, patio and lanai screen repair, window and door screen repair, screen door replacement, pet-resistant screen installation, storm damage repair and screen enclosure frame repair. Every service is available across the whole service area at the same pricing.